1 caution: these devices are sensitive to electrostatic discharge; follow proper ic handling procedures. 1-888-intersil or 1-888-468-3774 | copyright intersil americas inc. 2011. all rights reserved intersil (and design) is a trademark owned by intersil corporation or one of its subsidiaries. all other trademarks mentioned are the property of their respective owners. soc dual channel 133mhz pin electronics solution ISL55164 the ISL55164 is a highly integrated system-on-a-chip (soc) pin electronics solution aimed at incorporating every analog function, along with some di gital support functionality, required on a per channel basis for automated test equipment, the interface, contro l and i/o of the chip are all digital; all analog circuitry is inside the chip. two complete tester channels are integrated into each ISL55164. the ISL55164 is pin and functionally compatible with venus. features ? 133mhz ? 3.75ns minimum pulse width ? pin electronics driver/comparator - 3 level driver (dvh/dvl/vtt) - 8v driver output swings - 16v comparator input voltage range - extremely low hiz le akage over 16v range ? per pin pmu - fv, fi, mv, mi - 8 current ranges (32ma, 8ma, 2ma, 512 a, 128 a, 32 a, 8 a, 2 a) - +12v super voltage capability - resistive load (8 selectable resistor values) ?deskew - propagation delay adjustment (up to 12.8ns range) - falling edge adjustment (up to 3.2ns range) - auto calibration via pll ? on-chip dc levels - 11 levels/pin - gain and offset /level - dut ground sensing/pin ? 3-bit serial cpu port - load internal registers and memory - read back internal states ? flexible high speed digital inputs and outputs - selectable on-chip terminations for high speed inputs -50 series terminated high speed for comparator outputs ? package/power dissipation - 64-lead, 10mm x 10mm tqfp with top exposed heat slug -pdq 1.10w/channel; pdq 2.2w/chip applications ? automated test equipment ? instrumentation ?asic verifiers 2 dvh-0 cvb-0 cva-0 vtt-0 data_0 dout_0 cvb-1 cva-1 dout_1 ext_sense ext_force monitor comp_b_0 comp_a_0 en_0 data_1 comp_b_1 comp_a_1 en_1 dvl-0 dvh-1 vtt-1 dvl-1 2 2 2 2 2 2 2 cva-ppmu-0 cvb-ppmu-0 cva-ppmu-1 cvb-ppmu-1 pmu + - + - + - + - + - + - + - + - pmu f/s v-mu f/s v-mu figure 1. block diagram march 7, 2011 fn7826.0 get full datasheet
ISL55164 2 intersil products are manufactured, assembled and tested utilizing iso9000 quality systems as noted in the quality certifications found at www.intersil.com/design/quality intersil products are sold by description only. intersil corporat ion reserves the right to make changes in circuit design, soft ware and/or specifications at any time without notice. accordingly, the reader is cautioned to verify that data sheets are current before placing orders. information furnished by intersil is believed to be accurate and reliable. however, no responsi bility is assumed by intersil or its subsid iaries for its use; nor for any infringem ents of patents or other rights of third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of i ntersil or its subsidiaries. for information regarding intersil corporation and its products, see www.intersil.com fn7826.0 march 7, 2011 for additional products, see www.intersil.com/product_tree
|
